membarrier(2) — Linux manual pages

Linux manual pages	Section 2

Name

membarrier — issue memory barriers on a set of threads

Synopsis

#include <linux/membarrier.h>

`int membarrier(`	int `cmd`,
	unsigned int `flags`,
	int `cpu_id)`;

	Note
	There is no glibc wrapper for this system call; see NOTES.

DESCRIPTION

The membarrier() system call helps reducing the overhead of the memory barrier instructions required to order memory accesses on multi-core systems. However, this system call is heavier than a memory barrier, so using it effectively is not as simple as replacing memory barriers with this system call, but requires understanding of the details below.

Use of memory barriers needs to be done taking into account that a memory barrier always needs to be either matched with its memory barrier counterparts, or that the architecture's memory model doesn't require the matching barriers.

There are cases where one side of the matching barriers (which we will refer to as "fast side") is executed much more often than the other (which we will refer to as "slow side"). This is a prime target for the use of membarrier(). The key idea is to replace, for these matching barriers, the fast-side memory barriers by simple compiler barriers, for example:

asm volatile ("" : : : "memory")

and replace the slow-side memory barriers by calls to membarrier().

This will add overhead to the slow side, and remove overhead from the fast side, thus resulting in an overall performance increase as long as the slow side is infrequent enough that the overhead of the membarrier() calls does not outweigh the performance gain on the fast side.

The cmd argument is one of the following:

MEMBARRIER_CMD_QUERY (since Linux 4.3)

Query the set of supported commands. The return value of the call is a bit mask of supported commands. MEMBARRIER_CMD_QUERY, which has the value 0, is not itself included in this bit mask. This command is always supported (on kernels where membarrier() is provided).

MEMBARRIER_CMD_GLOBAL (since Linux 4.16)

Ensure that all threads from all processes on the system pass through a state where all memory accesses to user-space addresses match program order between entry to and return from the membarrier() system call. All threads on the system are targeted by this command.

MEMBARRIER_CMD_GLOBAL_EXPEDITED (since Linux 4.16)

Execute a memory barrier on all running threads of all processes that previously registered with MEMBARRIER_CMD_REGISTER_GLOBAL_EXPEDITED.

Upon return from the system call, the calling thread has a guarantee that all running threads have passed through a state where all memory accesses to user-space addresses match program order between entry to and return from the system call (non-running threads are de facto in such a state). This guarantee is provided only for the threads of processes that previously registered with MEMBARRIER_CMD_REGISTER_GLOBAL_EXPEDITED.

Given that registration is about the intent to receive the barriers, it is valid to invoke MEMBARRIER_CMD_GLOBAL_EXPEDITED from a process that has not employed MEMBARRIER_CMD_REGISTER_GLOBAL_EXPEDITED.

The "expedited" commands complete faster than the non-expedited ones; they never block, but have the downside of causing extra overhead.

MEMBARRIER_CMD_REGISTER_GLOBAL_EXPEDITED (since Linux 4.16)

MEMBARRIER_CMD_PRIVATE_EXPEDITED (since Linux 4.14)

Execute a memory barrier on each running thread belonging to the same process as the calling thread.

Upon return from the system call, the calling thread has a guarantee that all its running thread siblings have passed through a state where all memory accesses to user-space addresses match program order between entry to and return from the system call (non-running threads are de facto in such a state). This guarantee is provided only for threads in the same process as the calling thread.

The "expedited" commands complete faster than the non-expedited ones; they never block, but have the downside of causing extra overhead.

A process must register its intent to use the private expedited command prior to using it.

MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED (since Linux 4.14)

MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE (since Linux 4.16)

In addition to providing the memory ordering guarantees described in MEMBARRIER_CMD_PRIVATE_EXPEDITED, upon return from system call the calling thread has a guarantee that all its running thread siblings have executed a core serializing instruction. This guarantee is provided only for threads in the same process as the calling thread.

The "expedited" commands complete faster than the non-expedited ones, they never block, but have the downside of causing extra overhead.

A process must register its intent to use the private expedited sync core command prior to using it.

MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_SYNC_CORE (since Linux 4.16)

MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ (since Linux 5.10)

Ensure the caller thread, upon return from system call, that all its running thread siblings have any currently running rseq critical sections restarted if flags parameter is 0; if flags parameter is MEMBARRIER_CMD_FLAG_CPU, then this operation is performed only on CPU indicated by cpu_id. This guarantee is provided only for threads in the same process as the calling thread.

RSEQ membarrier is only available in the "private expedited" form.

A process must register its intent to use the private expedited rseq command prior to using it.

MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_RSEQ (since Linux 5.10)

MEMBARRIER_CMD_SHARED (since Linux 4.3)

This is an alias for MEMBARRIER_CMD_GLOBAL that exists for header backward compatibility.

The flags argument must be specified as 0 unless the command is MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ, in which case flags can be either 0 or MEMBARRIER_CMD_FLAG_CPU.

The cpu_id argument is ignored unless flags is MEMBARRIER_CMD_FLAG_CPU, in which case it must specify the CPU targeted by this membarrier command.

All memory accesses performed in program order from each targeted thread are guaranteed to be ordered with respect to membarrier().

If we use the semantic barrier() to represent a compiler barrier forcing memory accesses to be performed in program order across the barrier, and smp_mb() to represent explicit memory barriers forcing full memory ordering across the barrier, we have the following ordering table for each pairing of barrier(), membarrier(), and smp_mb(). The pair ordering is detailed as (O: ordered, X: not ordered):

barrier() smp_mb() membarrier() barrier() X X O smp_mb() X O O membarrier() O O O

RETURN VALUE

On success, the MEMBARRIER_CMD_QUERY operation returns a bit mask of supported commands, and the MEMBARRIER_CMD_GLOBAL, MEMBARRIER_CMD_GLOBAL_EXPEDITED, MEMBARRIER_CMD_REGISTER_GLOBAL_EXPEDITED, MEMBARRIER_CMD_PRIVATE_EXPEDITED, MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED, MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE, and MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_SYNC_CORE operations return zero. On error, −1 is returned, and errno is set to indicate the error.

For a given command, with flags set to 0, this system call is guaranteed to always return the same value until reboot. Further calls with the same arguments will lead to the same result. Therefore, with flags set to 0, error handling is required only for the first call to membarrier().

ERRORS

EINVAL: cmd is invalid, or flags is nonzero, or the MEMBARRIER_CMD_GLOBAL command is disabled because the nohz_full CPU parameter has been set, or the MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE and MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_SYNC_CORE commands are not implemented by the architecture.
ENOSYS: The membarrier() system call is not implemented by this kernel.
EPERM: The current process was not registered prior to using private expedited commands.

VERSIONS

The membarrier() system call was added in Linux 4.3.

Before Linux 5.10, the prototype for membarrier() was:

  int membarrier(int cmd, int flags);

CONFORMING TO

membarrier() is Linux-specific.

NOTES

A memory barrier instruction is part of the instruction set of architectures with weakly ordered memory models. It orders memory accesses prior to the barrier and after the barrier with respect to matching barriers on other cores. For instance, a load fence can order loads prior to and following that fence with respect to stores ordered by store fences.

Program order is the order in which instructions are ordered in the program assembly code.

Examples where membarrier() can be useful include implementations of Read-Copy-Update libraries and garbage collectors.

Glibc does not provide a wrapper for this system call; call it using syscall(2).

EXAMPLES

Assuming a multithreaded application where "fast_path()" is executed very frequently, and where "slow_path()" is executed infrequently, the following code (x86) can be transformed using membarrier():

#include <stdlib.h>

static volatile int a, b;

static void
fast_path(int *read_b)
{
    a = 1;
    asm volatile ("mfence" : : : "memory");
    *read_b = b;
}

static void
slow_path(int *read_a)
{
    b = 1;
    asm volatile ("mfence" : : : "memory");
    *read_a = a;
}

int
main(int argc, char **argv)
{
    int read_a, read_b;

    /*
     * Real applications would call fast_path() and slow_path()
     * from different threads. Call those from main() to keep
     * this example short.
     */

    slow_path(&read_a);
    fast_path(&read_b);

    /*
     * read_b == 0 implies read_a == 1 and
     * read_a == 0 implies read_b == 1.
     */

    if (read_b == 0 && read_a == 0)
        abort();

    exit(EXIT_SUCCESS);
}

The code above transformed to use membarrier() becomes:

#define _GNU_SOURCE
#include <stdlib.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>
#include <linux/membarrier.h>

static volatile int a, b;

static int
membarrier(int cmd, unsigned int flags, int cpu_id)
{
    return syscall(__NR_membarrier, cmd, flags, cpu_id);
}

static int
init_membarrier(void)
{
    int ret;

    /* Check that membarrier() is supported. */

    ret = membarrier(MEMBARRIER_CMD_QUERY, 0, 0);
    if (ret < 0) {
        perror("membarrier");
        return −1;
    }

    if (!(ret & MEMBARRIER_CMD_GLOBAL)) {
        fprintf(stderr,
            "membarrier does not support MEMBARRIER_CMD_GLOBAL\n");
        return −1;
    }

    return 0;
}

static void
fast_path(int *read_b)
{
    a = 1;
    asm volatile ("" : : : "memory");
    *read_b = b;
}

static void
slow_path(int *read_a)
{
    b = 1;
    membarrier(MEMBARRIER_CMD_GLOBAL, 0, 0);
    *read_a = a;
}

int
main(int argc, char **argv)
{
    int read_a, read_b;

    if (init_membarrier())
        exit(EXIT_FAILURE);

    /*
     * Real applications would call fast_path() and slow_path()
     * from different threads. Call those from main() to keep
     * this example short.
     */

    slow_path(&read_a);
    fast_path(&read_b);

    /*
     * read_b == 0 implies read_a == 1 and
     * read_a == 0 implies read_b == 1.
     */

    if (read_b == 0 && read_a == 0)
        abort();

    exit(EXIT_SUCCESS);
}

COLOPHON

This page is part of release 5.11 of the Linux man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at https://www.kernel.org/doc/man−pages/.

  Copyright 2015-2017 Mathieu Desnoyers <mathieu.desnoyersefficios.com>

%%%LICENSE_START(VERBATIM)
Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

Permission is granted to copy and distribute modified versions of this
manual under the conditions for verbatim copying, provided that the
entire resulting derived work is distributed under the terms of a
permission notice identical to this one.

Since the Linux kernel and libraries are constantly changing, this
manual page may be incorrect or out-of-date.  The author(s) assume no
responsibility for errors or omissions, or for damages resulting from
the use of the information contained herein.  The author(s) may not
have taken the same level of care in the production of this manual,
which is licensed free of charge, as they might when working
professionally.

Formatted or processed versions of this manual, if unaccompanied by
the source, must acknowledge the copyright and authors of this work.
%%%LICENSE_END